Cryoproducts
offer a comprehensive range of approved spares
and accessories for use on Cryoproducts equipment;
this includes stainless steel flexible transfer
hoses vessel spares and electronic control
equipment.
We can also supply replacement
relief valves and rupture discs, which comply
with PED (Pressure Equipment Directive)
and the Pressure Systems Safety Regulations
2000.
For price details
>> Contact Us
Electronic
Level Indicator - EPD548
Battery operated analogue read out
LN2 contents level indicator supplied
with probe tube to fit all Cryoproducts
pressurised Dewars.
Low Level
Alarm - ESP705B
Automatic monitoring of low pressure
vessels, refrigerators, cryostats,
Dewars, and cold traps. Visual and
audible warning, remote alarm connection
(Battery powered option ESP705).
Automatic
Level Controller - ESP704
An electronic automatic level control
unit fitted with four level sensors
for positioning at different heights.
Built in alarm, manual override. Operates
solenoid.
Digital
Electronic Thermometer - ESP825
Hand held battery operated reliable
temperature monitoring from +250¾C
to –200¾C. Clear digital display.
Hose Safety
Relief Device - ESP735
An inline relief device 1/2”bsp
male to 1/2”bsp female R/v set
at 60 psi and mounted on a heat break
coil.
Used to relief trapped volume when
two inline valves are closed.
Phase
Separator - ESP717
Sintered brass filter bsp male fitting
for connection to decanting hoses
to reduce splashing when decanting
into open vessels.
Electric
Pump Dispenser - EMP025-EMP125
Cryo-submersible mini pump 12v dc
used to pump LN2 from open vessels
with a neck diameter over 50mm. Shaft
length is made to suit vessel height.
A range of spares is available for
pumps, details available on request.
Cryoproducts
Vessel Spares
• EPD550 Bursting disc assembly
(set at 45 psi).
• EPD522 Relief valve 1/4in bsp
(set at 30 psi).
• EPD521 Pressure regulator in
bsp female.
• EPD509 Pressure gauge 0-60
psi 1/8 in.
• EPD502 KF50 Manifold clamp.
• EPD512 in bsp ball valve (vented).
• EPD514 in bsp ball valve (vented).
• EEC115 Castor wheel assembly.
• ESP734 Castor wheel assembly
(Braked).
• EPD508 ‘O’ Ring (manifold).
• EPD506 Gasket (manifold).
• EMS033 Polystyrene neck plug
for EMS25.
• ESP725 Polystyrene neck plugs
for EMS25 with chain.
Solenoid
Valves
• ESP706 12-volt DC operation
1/2in bsp female end fittings.
• ESP707 220-volt AC operation
1/2in bsp end fittings.
Flexible
Transfer Hoses
• ESP710 S/S Hose 4ft long x
1/2in bore.
• ESP711 S/S Hose 6ft long x
1/2in bore.
• ESP712 S/S Hose 8ft long x
1/2in bore.
• ESP713 S/S Hose 4ft long x
1/4in bore.
• ESP714 S/S Hose 6ft long x
1/4in bore.
• ESP715 S/S Hose 8ft long x
1/4in bore.
All hose end fittings are BSP male-BSP
female running nut.
