Accessories & Spares

We offer a comprehensive range of approved spares and accessories for use on Cryoproducts equipment; this includes stainless steel flexible transfer hoses vessel spares and electronic control equipment.

We can also supply replacement relief valves and rupture discs, which comply with PED (Pressure Equipment Directive) and the Pressure Systems Safety Regulations 2000.

Electronic Level Indicator

Electronic Level Indicator - EPD548

Battery operated analogue read out LN2 contents level indicator supplied with probe tube to fit all Cryoproducts pressurised Dewars

Low Level AlarmLow Level Alarm - ESP705B

Automatic monitoring of low pressure vessels, refrigerators, cryostats, Dewars, and cold traps. Visual and audible warning, remote alarm connection (Battery powered option ESP705).

Automatic Level ControlAutomatic Level Controller - ESP704

An electronic automatic level control unit fitted with four level sensors for positioning at different heights. Built in alarm, manual override. Operates solenoid.

Digital ThermometerDigital Electronic Thermometer - ESP825

Hand held battery operated reliable temperature monitoring from +250¾C to –200¾C. Clear digital display.

Hose Safety ReleaseHose Safety Relief Device - ESP735

An inline relief device 1/2”bsp male to 1/2”bsp female R/v set at 60 psi and mounted on a heat break coil.

Used to relief trapped volume when two inline valves are closed.

Phase SeperatorPhase Separator - ESP717

Sintered brass filter bsp male fitting for connection to decanting hoses to reduce splashing when decanting into open vessels.

Electronic Pump DispenserElectric Pump Dispenser - EMP025-EMP125

Cryo-submersible mini pump 12v dc used to pump LN2 from open vessels with a neck diameter over 50mm. Shaft length is made to suit vessel height.

A range of spares is available for pumps, details available on request.

Cryogenic Vessel SparesCryoproducts Vessel Spares

  • EPD550 Bursting disc assembly (set at 45 psi).
  • EPD522 Relief valve 1/4in bsp (set at 30 psi).
  • EPD521 Pressure regulator in bsp female.
  • EPD509 Pressure gauge 0-60 psi 1/8 in.
  • EPD502 KF50 Manifold clamp.
  • EPD512 in bsp ball valve (vented).
  • EPD514 in bsp ball valve (vented).
  • EEC115 Castor wheel assembly.
  • ESP734 Castor wheel assembly (Braked).
  • EPD508 ‘O’ Ring (manifold).
  • EPD506 Gasket (manifold).
  • EMS033 Polystyrene neck plug for EMS25.
  • ESP725 Polystyrene neck plugs for EMS25 with chain.

Solenoid valvesSolenoid Valves

  • ESP706 12-volt DC operation 1/2in bsp female end fittings.
  • ESP707 220-volt AC operation 1/2in bsp end fittings.

Flexible Transfer HosesFlexible Transfer Hoses

  • ESP710 S/S Hose 4ft long x 1/2in bore.
  • ESP711 S/S Hose 6ft long x 1/2in bore.
  • ESP712 S/S Hose 8ft long x 1/2in bore.
  • ESP713 S/S Hose 4ft long x 1/4in bore.
  • ESP714 S/S Hose 6ft long x 1/4in bore.
  • ESP715 S/S Hose 8ft long x 1/4in bore.

All hose end fittings are BSP male-BSP female running nut.

Get In Touch